Free resource
Church AV handoff checklist
What happens if our sound volunteer is away? Print this, fill in the blanks with your own system’s details, and keep a copy at the sound desk.
This is a general checklist. It is not specific to any particular system, and it is not a substitute for guidance from your installer or the equipment manuals. Where it says to write something in, that is because the right answer depends on your equipment.
1. Before the service
Start-up
Power on, in this order
- Write your system's actual order here, or copy it from the person who knows it. Typical order: sources and computers, mixer or sound console, then amplifiers or powered speakers last.
- Check that the mixer's main output is turned down before powering amplifiers.
- Turn on displays or projectors and confirm the right input is selected.
- Put fresh batteries in wireless microphones and check each is on the right channel.
- Start the livestream computer and confirm it sees the audio and video feeds.
Before people arrive
- Speak into each microphone you will use and listen from the back of the room.
- Play something through the sound system and check for hum, crackle, or a dead side.
- Check slides or lyrics on the screens from the back of the room.
- Confirm a second person knows where the start-up guide is.
Your startup sequence
Write the order your system actually uses, one step per line. Ask the person who knows it to read it back to you.
2. During the service
Common problems: check this first
No sound from anything
Is the mixer's main output up, and are the amplifiers or powered speakers switched on?
One wireless microphone is silent or cutting out
Batteries, then the mute switch, then whether it is on the right channel.
Loud feedback or ringing
Turn down the microphone that is closest to a speaker, then raise it slowly.
Screen or projector shows no signal
Is the right input selected, and is the cable at the computer seated?
Livestream has no audio or video
Is the stream software set to the right audio source, and is the feed muted there?
Something else, or nothing above helps
Stop, write down what you see, and use the contact list below. Do not change settings you do not recognize.
Want more than one line per problem? The AV first checks guide walks through no sound in the room, no audio on the livestream, and a display with no picture, and says when to stop and call for help.
3. After the service
Shutdown
- Turn down the mixer's main output before powering anything off.
- Power off amplifiers or powered speakers first, then the mixer, then sources.
- Turn off displays and projectors.
- Take wireless microphones off the air and remove batteries or place them on chargers.
- Stop and close the livestream software, and log out of any shared accounts.
- Coil and put away cables; leave the room as you found it.
- Write down anything that went wrong, with the date, in the issue log.
4. Who to call
Fill these in before you need them
Installer or AV service company
NamePhoneIT provider or administrator
NamePhoneSystemThread contact
NamePhoneSound or media volunteer lead
NamePhoneBackup operator
NamePhone
5. Records to keep
Keep these in one place
- Manuals for the mixer, amplifiers, speakers, microphones, projectors, and displays
- Purchase invoices and dates for each major item
- Warranty papers and registration confirmations
- A list of what is installed, and where, with model numbers
- Installer paperwork: proposal, drawings, as-built notes, service agreement
- Network details and passwords, kept by your IT provider or administrator (do not write them on this page)
- An issue log: date, what happened, who fixed it, what they changed
Found gaps while filling this in?
Blanks you could not fill are useful information. A short consultation can help you decide what to document first. See church AV support for how we work with churches and your existing installer.
Review the gaps in a consultation.
Bring your filled-in checklist. We will talk through what is missing and whether an assessment would help. It is a conversation, not a sales visit.
Prefer email? kingston@proaudioenterprises.com