Skip to main content
SystemThread

Free resource

First checks when the AV is not working

Three common problems, with plain-language checks a volunteer or office manager can try without tools or opening any equipment. Each ends with when to stop and call for help.

These are general first checks, not instructions for any particular system. Your own system’s quick-start guide takes priority, and so do your installer’s instructions and your IT team’s policies. If you are unsure about a step, do not do it.

Problem 1

No sound in the room

Use this when microphones or playback are silent in the room itself. Go in this order, and stop as soon as it works.

Check these, in order

  1. Is everything switched on? Look for power lights on the mixer and on any amplifiers or powered speakers. Use only the power switches your team normally uses.
  2. Is something muted or turned down? Check the mixer’s main output, the channel for the microphone or source you expect, and any mute buttons. Raise levels slowly, never all at once.
  3. Is the right source playing and selected? Make sure the computer, player, or microphone is on, its own volume is up, and it is selected on the mixer or control panel. For a silent wireless microphone, try fresh batteries and check that its transmitter is on and not muted.
  4. Are the cables you can see seated? Turn the mixer’s main output all the way down first. Then look at the visible ends of the cables between the source and the mixer, and push in any plug that is loose. Leave amplifier and speaker connections to your installer, and do not unplug or move cables you do not recognize.
  5. Does the livestream have sound when the room does not? If it does, the problem points to the mixer’s room output, the amplifiers, or the speakers rather than the sources. Write that down for whoever you call.
  6. Restart only if your own guide says it is safe. Turn the mixer’s main output down first, then follow the shutdown and start-up order in your guide. A common pattern is amplifiers off first and on last, but your guide’s order wins. Never switch equipment on and off in quick succession.

Stop and hand off when…

  • Fixing it would mean opening a rack, a panel, or any equipment.
  • It involves electrical work: breakers, outlets, wiring, or power equipment beyond the normal switches.
  • It looks like a network or security setting, such as a digital audio network, a firewall, or a login. Those belong to your IT team.
  • A fault light or error message appears, or the same problem returns after a restart.
  • You smell burning, see smoke, or equipment feels unusually hot. For smoke or fire, follow your building’s emergency procedures first. Otherwise switch it off at its normal power switch only if you can do that without touching anything hot, leave it off, and call your installer or electrician.

Equipment questions go to your installer or AV service company. Network, login, and security questions go to your IT team or provider.

Problem 2

The livestream has no audio

Use this when the room sounds normal but viewers have no audio. If the room is silent too, start with no sound in the room.

Check these, in order

  1. Confirm what viewers actually hear. Listen to the stream on a second device with headphones, so the room does not fool you. Streams run a few seconds behind the room, so wait before deciding.
  2. Is the streaming software using the right audio source? Look for a muted source, a muted speaker icon, or a level meter that stays flat while the room is loud.
  3. Does the software’s level meter move when someone speaks? If it moves, audio is reaching the software, and the cause may be in the streaming service’s own settings or account. If it stays flat, keep going down this list.
  4. Is the mixer sending sound to the stream? Many mixers feed the stream from a separate output or send, often labeled aux, matrix, or stream, which is controlled apart from the room. Check that it is not muted or turned all the way down. Change only controls you recognize and your guide describes, and do not re-route anything.
  5. Are the cables or adapters between the mixer and the streaming computer seated? Check both visible ends. A computer can also switch to a different audio input when a device is plugged in or removed. If you know which input is correct, choose it in the streaming software.
  6. Reopen the streaming software only when the stream is not live. Close it, open it again, and check its audio source. Do not restart it during a live stream unless your guide says that is fine, and do not restart the computer unless you have been told how.

Stop and hand off when…

  • Audio reaches the streaming software but viewers still hear nothing. That may be an account, streaming-service, or network issue for your IT provider or whoever manages the stream.
  • The fix involves network, firewall, or account settings, or a login you do not have.
  • It would mean changing mixer routing or software settings you do not recognize, or opening any equipment.
  • The problem returns after you fix it, or an error message appears again.
  • You smell burning, see smoke, or equipment feels unusually hot. For smoke or fire, follow your building’s emergency procedures first. Otherwise switch it off at its normal power switch only if you can do that without touching anything hot, leave it off, and call your installer or electrician.

Equipment questions go to your installer or AV service company. Network, login, and security questions go to your IT team or provider.

Problem 3

A display shows no picture or the wrong input

Use this for a screen or projector that is blank, says it has no signal, or shows something other than what you expect.

Check these, in order

  1. Is the display on? Look for a power light and use its normal remote or power button. Projectors can take a little while to warm up before a picture appears.
  2. Is the right input selected? With the display’s remote or buttons, step through the inputs one at a time, for example HDMI 1, then HDMI 2, and give each a few seconds to show a picture.
  3. Is there a switcher or wall plate between the source and the display? If so, check that its source button is on the right source too.
  4. Is the source awake and sending a picture? Wake the computer or player and make sure its screen is not asleep or blank. If the picture is on the computer but not on the display, check the computer’s own display settings for a second screen, if you know how and your IT policy allows it.
  5. Are the cable ends you can see seated? Check both ends, at the source and at the display or wall plate. Push in a loose plug gently, do not force it, and do not unplug cables you do not recognize.
  6. Restart only if your own guide says it is safe. Switch the display off with its normal power control, let it finish shutting down, then switch it on and let it finish starting before you change inputs. Do not cut its power at the wall.

Stop and hand off when…

  • The display will not power on, or a light blinks in a pattern you do not recognize.
  • Fixing it would mean opening a wall plate, ceiling mount, rack, or the equipment itself, or reaching something mounted overhead.
  • The display or source depends on a network, such as wireless casting, and the fix looks like a network, password, or security setting. Those belong to your IT team.
  • The picture drops out again, or a warning or error appears on the screen.
  • You smell burning, see smoke, or equipment feels unusually hot. For smoke or fire, follow your building’s emergency procedures first. Otherwise switch it off at its normal power switch only if you can do that without touching anything hot, leave it off, and call your installer or electrician.

Equipment questions go to your installer or AV service company. Network, login, and security questions go to your IT team or provider.

If it comes back

When the same problem keeps happening.

A fix that works once may not last. When a problem returns, or nobody can say why, that pattern is what a System Assessment is for: a look at what is installed, how it is used, and who supports it, with written findings and recommended priorities. SystemThread does not repair equipment. The findings help you take a clear description to the right provider.

Already have SystemThread Care? Use the contact named in your Care agreement. Something down right now? The request form is not monitored as an emergency line, so contact the installer or provider that supports your system.